====== RAK WiFi Setup ======

Follow these steps to configure the RAK router over Wi-Fi.

===== 1. Power On and Connect =====
  - Power on the router and wait for the LED to **pulse blue/green** (about 30 seconds to 1 minute).
  - On your PC, go to available Wi-Fi networks.
  - Find and **connect to the router's Wi-Fi network**.
{{:technical_docs:loriot:amazon-1.png?400|}}

===== 2. Access Router Interface =====
  - Once connected, open a web browser and go to: **https://192.168.230.1/**
  - You may see a **"Connection Not Private"** warning:
    - Click **Advanced**
{{:technical_docs:loriot:amazon-2.png?400|}}
    - Click **Proceed**
{{:technical_docs:loriot:amazon-3.png?400|}}
===== 3. Initial Configuration =====
  - On first connection, enter the password: **MyFridgeRAK#1**
  - When prompted, choose your region:
    - **South Africa**
    - **EU868**

===== 4. Configure for Amazon LNS =====
  - On **Amazon**, register the router and **download the certificates**.
  - On the router:
    - Set up **Basics Station** in **LNS mode**
    - Upload and apply the certificates

===== 5. Secure Network Settings =====
  - Navigate to **Network Settings > LAN**
  - Set a new **password** (use the same password as in Step 3)
  - The router will restart

===== 6. Final Checks =====
  - Ensure Wi-Fi access is secured
  - Confirm the router is **communicating with Amazon**

===== 7. Update Location Sheet =====
  - Record the updated device information in the **location sheet**