This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== MPXone ====== ===== 1. Install Carel Applica ===== Download and install the [[https://www.carel.com/apps|Carel Applica]] ===== 2. Connect To Your Controller ===== * Open the app and connect to your Carel controller using **Bluetooth** or **NFC** (depending on model). * You may need to select the account/profile **Service** * When prompted for a password input ** 22** ===== 3. Access the Parameters ===== * Open the main menu. * Navigate to the **Parameters** section.\\ {{:products:smrtcold:smrt_cold_mk2:mpx_one_parameters.jpg?direct&400|}} ===== 4. Selecting Communication Settings ===== On the search bar tap the filter icon and then select **Communication**\\ {{:products:smrtcold:smrt_cold_mk2:mpx_one_filter.jpg?direct&400|}} ===== 5. Set Communication Parameters ===== * H0 BMS Network Address: 1\\ {{:products:smrtcold:smrt_cold_mk2:mpx_one_h0.jpg?direct&400|}} * H1 BMS config.(stop bit and parity): Stop bit 2 parity none\\ {{:products:smrtcold:smrt_cold_mk2:mpx_one_h1.jpg?direct&400|}} * H2 BMS baudrate (bit/s): 19200\\ {{:products:smrtcold:smrt_cold_mk2:mpx_one_h2.jpg?direct&400|}} * H3 BMS protocol: Modbus\\ {{:products:smrtcold:smrt_cold_mk2:mpx_one_h3.jpg?direct&400|}}