This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ======Browan Setup On Loriot====== ======Prerequisites====== - The Browan router - A pen - Dot stickers - Access to location sheet or someone with access to the location sheet - Access to loriot portal or someone with access to the loriot portal ===== Follow the steps below to set up and register a Browan router. ===== ===== 1. Unboxing and Initial Setup ===== - Unbox the router. - Make note of the **password** on the back of the router. - Connect the **Browan** to power. ===== 2. Connect to Router ===== - On your PC, go to available **Wi-Fi networks**. - Find and connect to the **Browan router** using the password from the back of the device. ===== 3. Router Configuration ===== - Open a web browser and go to: **https://192.168.1.1/** - Navigate to the **Configuration** tab. - In the **Protocol** section: - Set **Server Address** to: `eu4pro.loriot.io` - Set **Server Port Up** to: `1780` - Set **Server Port Down** to: `1780` - Click **Save Changes**. ===== 4. Register the Router on Loriot ===== - Log into [Loriot](https://www.loriot.io/) - Register the router using its details. - Verify that the router is **communicating** properly. ===== 5. Gather Gateway Information ===== - Navigate to the **Dashboard Overview** tab. - Copy the following: - **EUI** – Add this to the **location sheet** - **MAC Address** – Add this to the **location sheet** ===== 6. Final Steps ===== - Repackage the router. - Place the **sticker** on the **top of the box**. - Write the **current date** on the sticker to indicate setup completion.